Building Solution Store

ECMAGROUT PU M 620 is a two component, solvent and phthalate free, low viscosity, polyurethane injection system for the elastic sealing of cracks in concrete structures with a dual performance: a. In case water is present, it will form an elastic foam b. In case there is no water or the water has been reacted away, the material will form a flexible resin with the performance of a permanent sealing To stop water leakage ECMAGROUT PU M 620 could be used as a premix and injected as a single component and a flexible foam will be formed. To create a permanent elastic seal, the structure can be re-injected with ECMAGROUT PU M 620 using the same material and the same pump and the same packer

ECMAGROUT PU F 200 is a single-component, water-reactive polyurethane injection system that is hydrophobic, solvent-free, and phthalate-free. It is a PU injection foam that can stop water leakages in concrete.
Some advantages of ECMAGROUT PU F 200

• Suitable for hot and cold climates
• Good adhesion to substrate
• Withstands high hydrostatic pressures
• Suitable for use in contact with potable water

Additional Information:

• Delivery Time: 1 day

Apply first coat of fully mixed RIPSTAR Saturant to primed concrete substrate using roller or brush. Place the RIPSTAR fiber sheet and roll in the longitudinal direction of the fibers two or three times using a deforming roller and rubber spatula in order to impregnate the resin into the fibers and to deform the resin coat. For joining strips of fiber sheet, a 15 cm overlap length is required in the main direction. The additional resin must be applied at the overlap location on top of the outer layer of fiber sheet to be overlapped. Apply the second coat of RIPSTAR Saturant ensuring total saturation of the RIPSTAR fiber sheets. Where more than one layer of fiber sheet is to be applied, the above application method for RIPSTAR Saturant should be repeated. In case of protection with plaster, ensure to dry-shake oven-dried fine quartz grains to assist bond strength with overlay.  

Additional Information:

• Item Code: 32089090
• Production Capacity: 1000
• Delivery Time: 1 Week
• Packaging Details: RIPSTAR SATURANT is supplied in 5 kg two-component pack.